Arduino Pro

From bildr

Jump to: navigation, search

The Arduino Pro is a microcontroller board based on the ATmega168 or ATmega328.

The Pro comes in both 3.3V / 8 MHz and 5V / 16 MHz versions.

It has 14 digital input/output pins (of which 6 can be used as PWM outputs), 6 analog inputs, a battery power jack, a power switch, a reset button, and holes for mounting a power jack, an ICSP header, and pin headers.

A six pin header can be connected to an FTDI cable or Sparkfun breakout board to provide USB power and communication to the board.

NOTE: All information contained within this article is pure opinion. Although this article is intended to help people, it may contain faulty or misleading information. This article is not to be considered professional opinion or advice, and is in no way a replacement for reading all safety/instructional documentation. Always remember to protect yourself when handling/using hazardous materials, as well as test new techniques before using them on projects/work intended to be handed in or used.

bildr and its contributers take NO responsibility for the information contained within.