Axon
From bildr
The Axon was developed for robots that go beyond the basics. With the Axon, you will no longer need to worry about not having enough I/O as it has 55+ for you to use - up to 16 ports for analog sensors, and up to 18 for interrupts. You will never be wanting of UART, as there are 3 directly available, with a 4th used for a USB connection directly to your PC. No additional programmer needed due to a built in programmer (bootloader). Lastly, extensive source code and tutorials have been developed to make it easy enough for a beginner.
Features:
For detailed information, please refer to the Axon Datasheet.
- 55 I/O Total
- Up to 16 ADC
- Up to 29 Servos
- I2C, SPI
- 3 UART
- Serial to USB Converter (4th UART)
- Up to 18 interrupts
- Up to 9 PWM Channels (7 without modification)
- 64KB Flash, 4KB EEPROM, 8KB SRAM
- 16 MIPS throughput at 16 MHz
- 6 Timers (four 16-bit, two 8-bit)
- pre-programmed with a bootloader - no programmer required
- built in power buses
- all software is free
- 100% open source
- and more!
Availability
This page is a Component on bildr. Components are pages about specific parts, and include connection details and code when available.