Bare-Bones PIC Design (Blinking LED)

From bildr

Jump to: navigation, search

This Module is part of the grouping: Blinking LED

Bare-Bones PIC design has only very essential components to power-up and run a PIC micro-controller with a small program.

Schematics & Components

File:PicBareBones.png

PIC16F873A or PIC16F877A - 1
Resistor 10K - 1
Resistor 330E - 1
LED Green or Red - 1
Capacitor .01uF - 1
Capacitor 10uF - 1
Capacitor 22puF - 2
Crystal 4Mhz - 1
Bread Board
5V Power Supply
PIC Programmer
MPLAB IDE

Availability

Retrieved from "http://wiki.bildr.org/index.php?title=Bare-Bones_PIC_Design_(Blinking_LED)&oldid=9245"

NOTE: All information contained within this article is pure opinion. Although this article is intended to help people, it may contain faulty or misleading information. This article is not to be considered professional opinion or advice, and is in no way a replacement for reading all safety/instructional documentation. Always remember to protect yourself when handling/using hazardous materials, as well as test new techniques before using them on projects/work intended to be handed in or used.

bildr and its contributers take NO responsibility for the information contained within.