The baud rate describes the speed of a parallel or serial communication in bits per second (bps). Both the receiver (RX) and transmitter(TX) have to be set to the same baud rate, or else the receiver will only receive garbage.
This page is an Article on bildr. Articles are pages that define or explain a concept, method, or generic item.
NOTE: All information contained within this article is pure opinion. Although this article is intended to help people, it may contain faulty or misleading information. This article is not to be considered professional opinion or advice, and is in no way a replacement for reading all safety/instructional documentation. Always remember to protect yourself when handling/using hazardous materials, as well as test new techniques before using them on projects/work intended to be handed in or used.
bildr and its contributers take NO responsibility for the information contained within.