Dual Axis Accelerometer Breakout Board - ADXL322

From bildr

Jump to: navigation, search


Dual Axis Accelerometer Breakout Board ADXL322 2g.jpg

Breakout board for the dual axis ADXL32x accelerometers. Brings out the analog voltage levels from the X and Y axis to a standard .1" header. The ADXL320 can be powered from 2.4V-5.25V. The Self-Test pin can be used to verify sensor operation.Board comes fully assembled and tested with selected sensor and 0.1uF filtering capacitors. Installed Sensor: ADXL322 (+/- 2g)18x18 mm (0.70x0.70")Software: The ADXL32x outputs an analog voltage. This voltage is in ratio to the measured acceleration and to the supply voltage (ratiometric). You will need some extra hardware to convert this analog signal to a usable digital one. Luckily, many uCs have a built in Analog to Digital converter.


Availability


This page is a Component on bildr. Components are pages about specific parts, and include connection details and code when available.

Retrieved from "http://wiki.bildr.org/index.php?title=Dual_Axis_Accelerometer_Breakout_Board_-_ADXL322&oldid=7033"

NOTE: All information contained within this article is pure opinion. Although this article is intended to help people, it may contain faulty or misleading information. This article is not to be considered professional opinion or advice, and is in no way a replacement for reading all safety/instructional documentation. Always remember to protect yourself when handling/using hazardous materials, as well as test new techniques before using them on projects/work intended to be handed in or used.

bildr and its contributers take NO responsibility for the information contained within.