EL Sequencer

From bildr

Jump to: navigation, search


ImageNeeded.png
  • Manufacturer: Sparkfun
  • Voltage: 3.7V DC
  • Communication: Serial

The EL Sequencer is a ATmega based control board that allows the user to program any sequence of blink, on/off, even PWM pulsing of EL wire.

ATmega168V Board can be powered from USB or LiPo Switch chooses source and acts as on/off Compatible with Arduino (8MHz LilyPad) On-board 8MHz external resonator TRIAC part #: Z0103MN 8 TRIACs can handle up to 600V Control 8 channels of EL Runs on 3.7V LiPo Footprint for connection to FTDI Basic for downloading code

Footprint for connection to Nordic nRF24L01 2.4GHz wireless module



This page is a Component on bildr. Components are pages about specific parts, and include connection details and code when available.

Retrieved from "http://wiki.bildr.org/index.php?title=EL_Sequencer&oldid=8052"

NOTE: All information contained within this article is pure opinion. Although this article is intended to help people, it may contain faulty or misleading information. This article is not to be considered professional opinion or advice, and is in no way a replacement for reading all safety/instructional documentation. Always remember to protect yourself when handling/using hazardous materials, as well as test new techniques before using them on projects/work intended to be handed in or used.

bildr and its contributers take NO responsibility for the information contained within.