JPEG Color Camera - UART Interface
From bildr
This is a simple-to-use, UART controlled, color camera with on-board JPEG compression. Capable of resolutions up to 640x480, and a number of color types. Send the snapshot command, and this module will capture a single-frame picture, compress it, and send it back over a serial connection. The easy-to-use and well defined command set is detailed in the User's Manual below.
This module includes an OmniVision OV7640/8 VGA camera sensor, OV528 camera-to-serial bridge, program EEPROM and a 4-wire cable that mates with the camera module.20x28x10mm
Features:
- Low power: 3.3V, 60mA
- 4-pin interface: Vdd, GND, TX, RX
- 100uA current consumption in sleep mode
- VGA resolution; built-in down-sampling to QVGA or CIF
- TTL interface of up to 115.2kbps, auto baud detection
- Simple, well-defined command set
- JPEG codec for different resolutions
- Built-in color conversion: 4 gray, 16 gray, 256 gray, 12-bit RGB, 16-bit RGB
Availability
This page is a Component on bildr. Components are pages about specific parts, and include connection details and code when available.