MO-RXLC-A

From bildr

Jump to: navigation, search


ImageNeeded.png

The MO-RXLC-A is a 2400bps RF ASK receiver module. It comes in 433.92 MHz (MO-RXLC-A434M) and 315 MHz (MO-RXLC-A315M) varieties.

The MO-SAWR has the following features:

  • 500 Ft. Range - Dependent on Transmitter Power Supply
  • 2400 bps transfer rate
  • Low cost
  • Extremely small and light weight

Contents

Hooking it up

The MO-RXLC-A takes a voltage from 4.5-5.5V, consuming about 3.5mA at 5V. The input signal is modulated to a digital output via an OOK / HCS / PWM modulation signal.

The pins are labeled from left to right on the chipped side.:

Pin Function
1 Ant
2 Gnd
3 Gnd
4 Vcc
5 Vcc
6 Data
7 Data
8 Gnd
The optimal antenna length for the receiver is 23cm and 17cm for the 315 MHz and 434 MHz receivers respectively.

Code


References

This page is a Component on bildr. Components are pages about specific parts, and include connection details and code when available.

Retrieved from "http://wiki.bildr.org/index.php?title=MO-RXLC-A&oldid=7618"

NOTE: All information contained within this article is pure opinion. Although this article is intended to help people, it may contain faulty or misleading information. This article is not to be considered professional opinion or advice, and is in no way a replacement for reading all safety/instructional documentation. Always remember to protect yourself when handling/using hazardous materials, as well as test new techniques before using them on projects/work intended to be handed in or used.

bildr and its contributers take NO responsibility for the information contained within.