MO-SAWR

From bildr

Jump to: navigation, search


ImageNeeded.png

The MO-SAWR is a RF transmitter module intended for use in key-less entry devices. It comes in 433.92 (MO-SAWR-AS434M) and 315 MHz (MO-SAWR-AS315M) varieties and uses a SAW resonator.

The MO-SAWR has the following features:

  • 500 Ft. Range - Dependent on Transmitter Power Supply
  • 2400 or 4800bps transfer rate
  • Low cost
  • Extremely small and light weight

Contents

Hooking it up

The MO-SAWR takes a voltage from 1.5V-12.0V, with an operating temperature from between -20 to +85 C.

The pins are labeled as follows when viewing the side with the crystal, from left to right.:

Pin Function
1 Gnd
2 Data
3 Vcc
4 Ant

Code


References

This page is a Component on bildr. Components are pages about specific parts, and include connection details and code when available.

Retrieved from "http://wiki.bildr.org/index.php?title=MO-SAWR&oldid=7619"

NOTE: All information contained within this article is pure opinion. Although this article is intended to help people, it may contain faulty or misleading information. This article is not to be considered professional opinion or advice, and is in no way a replacement for reading all safety/instructional documentation. Always remember to protect yourself when handling/using hazardous materials, as well as test new techniques before using them on projects/work intended to be handed in or used.

bildr and its contributers take NO responsibility for the information contained within.