Perfboard

From bildr

Jump to: navigation, search

Perfboard is a base for prototyping circuit boards. It has holes pre-drilled at set intervals across a grid, usually a square grid of 2.54mm (0.1") spacing. Perfboard can be used for wire wrap prototypes and for solder prototypes. Copper or another metal can be plated onto the substrate in pre-arranged patterns. Discrete components are attached to the prototype board such as resistors, capacitors, and integrated circuits. The substrate is typically made of fiberglass or synthetic resin bonded paper.

References

This page is an Article on bildr. Articles are pages that define or explain a concept, method, or generic item.

Retrieved from "http://wiki.bildr.org/index.php?title=Perfboard&oldid=6337"

NOTE: All information contained within this article is pure opinion. Although this article is intended to help people, it may contain faulty or misleading information. This article is not to be considered professional opinion or advice, and is in no way a replacement for reading all safety/instructional documentation. Always remember to protect yourself when handling/using hazardous materials, as well as test new techniques before using them on projects/work intended to be handed in or used.

bildr and its contributers take NO responsibility for the information contained within.