Polar Heart Rate Monitor Interface

From bildr

Jump to: navigation, search


Polar Heart Rate Monitor Interface.jpg

This is a wonderful evaluation board cooperatively designed by danjuliodesigns and SparkFun. The Heart Rate Monitor Interface (HRMI) is an intelligent peripheral device that converts the ECG signal from the Polar Heart Rate Monitor (HRM) into easy-to-use heart rate data. It implements a sophisticated algorithm for computing an average heart rate even with noisy or intermittent data from the transmitter.

Features:

  • Multiple interfaces: USB, Logic-level serial and I2C
  • Dual heart rate processing algorithms: averaged and raw
  • Uses the RMCM01 Polar OEM receiver
  • Compatible with coded and non-coded Polar transmitters including T31, T31C, T61C and Wearlink®
  • 32-entry heart rate data history buffer
  • Four 8-bit ADC inputs
  • Up to a 5 channel digital input/output utility port
  • Simple command/response interface
  • Programmable power-on default operation
  • Only works with one transmitter (HRM) in range


Availability


This page is a Component on bildr. Components are pages about specific parts, and include connection details and code when available.


Retrieved from "http://wiki.bildr.org/index.php?title=Polar_Heart_Rate_Monitor_Interface&oldid=7108"

NOTE: All information contained within this article is pure opinion. Although this article is intended to help people, it may contain faulty or misleading information. This article is not to be considered professional opinion or advice, and is in no way a replacement for reading all safety/instructional documentation. Always remember to protect yourself when handling/using hazardous materials, as well as test new techniques before using them on projects/work intended to be handed in or used.

bildr and its contributers take NO responsibility for the information contained within.