Programmable IR Receiver SIS-2

From bildr

Jump to: navigation, search


Programmable IR Receiver SIS2.jpg

The SIS-2 monitors an IR receiver, and when a certain remote code is detected, an output pin will toggle. Two outputs are available and any code on any remote can be taught to the SIS-2. This makes it simple to implement an infrared (IR) remote controllable switching solution for a wide variety of applications. When used with an inexpensive IR receiver module, the SIS-2 recognizes IR signals from 2 independent IR remote control sources, and provides 2 modes of switching for your application. The IR sources can be from the same or multiple remotes. Works with over 99% of IR remotes, both universal and dedicated types. IR code is easily “taught“ by user with a few simple button presses on the IR remote. IR code is stored in non-volatile, re-programmable memory. Applications include switching and on/off control of two sources, volume control, digital pots, and servos.


Availability


This page is a Component on bildr. Components are pages about specific parts, and include connection details and code when available.

Retrieved from "http://wiki.bildr.org/index.php?title=Programmable_IR_Receiver_SIS-2&oldid=7080"

NOTE: All information contained within this article is pure opinion. Although this article is intended to help people, it may contain faulty or misleading information. This article is not to be considered professional opinion or advice, and is in no way a replacement for reading all safety/instructional documentation. Always remember to protect yourself when handling/using hazardous materials, as well as test new techniques before using them on projects/work intended to be handed in or used.

bildr and its contributers take NO responsibility for the information contained within.