Triple Axis Gyro LYPR540AH Breakout

From bildr

Jump to: navigation, search


Triple Axis Gyro LYPR540AH Breakout.jpg

One of the first triple axis gyros we've seen on the market! This is what we love to do - a simple breakout board for the triax LYPR540AH gyroscope, tested, and ready to go. Both 400dps and 1600dps outputs are brought out for all three channels.This board has an on-board 10k pull-down resistor to keep the gyro out of self test mode. You will normally attach to 5 wires: VCC/GND and 3 analog outputs (X/Y/Z), but the 4x amplified outputs are also available.Anyone else notice that ST has a typo on their datasheet - 'indipendant'? Glad we're not the only ones with bad speling.

Features:

  • 2.7 to 3.6V supply
  • 400 degree per second outputs
  • 1600 degree per second 4x amplified outputs
  • Self test pin
  • -3dB bandwidth @ 140Hz


Availability

This page is a Component on bildr. Components are pages about specific parts, and include connection details and code when available.

Retrieved from "http://wiki.bildr.org/index.php?title=Triple_Axis_Gyro_LYPR540AH_Breakout&oldid=7770"

NOTE: All information contained within this article is pure opinion. Although this article is intended to help people, it may contain faulty or misleading information. This article is not to be considered professional opinion or advice, and is in no way a replacement for reading all safety/instructional documentation. Always remember to protect yourself when handling/using hazardous materials, as well as test new techniques before using them on projects/work intended to be handed in or used.

bildr and its contributers take NO responsibility for the information contained within.