UART to Web Server Interface Card

From bildr

Jump to: navigation, search


UART to Web Server Interface Card.jpg

The Serial Web Server module provides TCP/IP access to the serial data. The output pin uses a 20-pin 2mm spacing layout, which is pin-compatible with XBee modules. The LinkSprite Serial Web Server module can also be plugged directly into a powerline communication modem to act as a powerline-to-web server bridge.Because it's a serial server, a configurable static IP address is used to prevent the IP address from being changed.  The IP and serial settings are configurable through the convenient AT commands, detailed in the datasheet.


Availability

This page is a Component on bildr. Components are pages about specific parts, and include connection details and code when available.


Retrieved from "http://wiki.bildr.org/index.php?title=UART_to_Web_Server_Interface_Card&oldid=5845"

NOTE: All information contained within this article is pure opinion. Although this article is intended to help people, it may contain faulty or misleading information. This article is not to be considered professional opinion or advice, and is in no way a replacement for reading all safety/instructional documentation. Always remember to protect yourself when handling/using hazardous materials, as well as test new techniques before using them on projects/work intended to be handed in or used.

bildr and its contributers take NO responsibility for the information contained within.