USB to FIFO Bridge - FT245RL

From bildr

Jump to: navigation, search


USB to FIFO Bridge FT245RL.jpg

The popular FTDI FT245RL USB to FIFO IC with built-in EEPROM and built-in oscillator! This IC comes in a 28-pin SSOP package and can be soldered by hand. The FT245R is the latest IC from FTDI requiring very few external components for operation! This FIFO IC gives the user 8 I/O pins for parallel reading and writing. Breakout board coming soon. Drivers: FTDI Driver Page

Features:

  • Implements full v2.0 USB protocol
  • Needs no external crystal
  • Requires only a pull-up resistor and two decoupling caps
  • Internal EEPROM for device ID and Product Description strings
  • Royalty-Free Driver support for Windows, Linux, and Mac OSX


Availability

This page is a Component on bildr. Components are pages about specific parts, and include connection details and code when available.

Retrieved from "http://wiki.bildr.org/index.php?title=USB_to_FIFO_Bridge_-_FT245RL&oldid=6153"

NOTE: All information contained within this article is pure opinion. Although this article is intended to help people, it may contain faulty or misleading information. This article is not to be considered professional opinion or advice, and is in no way a replacement for reading all safety/instructional documentation. Always remember to protect yourself when handling/using hazardous materials, as well as test new techniques before using them on projects/work intended to be handed in or used.

bildr and its contributers take NO responsibility for the information contained within.