USB to UART Bridge with GPIOs - CP2103

From bildr

Jump to: navigation, search


USB to UART Bridge with GPIOs CP2103.jpg

Silicon Laboratories USB to UART IC. The latest units from Signal: the CP2103 is a extended version of the CP2102 and CP2101. All the functionality with the addition of four general purpose I/O pins. That's right! You can drive four GPIO pins independantly via USB! Also available is the CP2103 Breakout Board!


Availability

This page is a Component on bildr. Components are pages about specific parts, and include connection details and code when available.

Retrieved from "http://wiki.bildr.org/index.php?title=USB_to_UART_Bridge_with_GPIOs_-_CP2103&oldid=6156"

NOTE: All information contained within this article is pure opinion. Although this article is intended to help people, it may contain faulty or misleading information. This article is not to be considered professional opinion or advice, and is in no way a replacement for reading all safety/instructional documentation. Always remember to protect yourself when handling/using hazardous materials, as well as test new techniques before using them on projects/work intended to be handed in or used.

bildr and its contributers take NO responsibility for the information contained within.