Single Axis Accelerometer Breakout Board - ADXL193
(Redirected from ADXL193)

From bildr

Jump to: navigation, search


Single Axis Accelerometer Breakout Board ADXL193 250g.jpg

Breakout board for the low power, single axis ADXL193 accelerometer. The ADXL193 is a high-g sensor with a full scale range of ±250g! The ADXL193 can be powered from 3.5-6V. Access to the self-test pin is also provided. Board comes fully assembled and tested with selected sensor and 10nF decoupling capacitor. Installed Sensor: ADXL193 (± 250g)0.4x0.55"Software: The ADXL193 outputs an analog voltage. This voltage is in ratio to the measured acceleration and to the supply voltage (ratiometric). You will need some extra hardware to convert this analog signal to a usable digital one. Luckily, many uCs have a built in Analog to Digital converter.


Availability

This page is a Component on bildr. Components are pages about specific parts, and include connection details and code when available.

NOTE: All information contained within this article is pure opinion. Although this article is intended to help people, it may contain faulty or misleading information. This article is not to be considered professional opinion or advice, and is in no way a replacement for reading all safety/instructional documentation. Always remember to protect yourself when handling/using hazardous materials, as well as test new techniques before using them on projects/work intended to be handed in or used.

bildr and its contributers take NO responsibility for the information contained within.