ATMega16

From bildr

Jump to: navigation, search

Overview

The ATmega16 is a low-power CMOS 8-bit microcontroller based on the AVR enhanced
RISC architecture. By executing powerful instructions in a single clock cycle, the
ATmega16 achieves throughputs approaching 1 MIPS per MHz allowing the system
designer to optimize power consumption versus processing speed.

High-performance, Low-power AVR® 8-bit Microcontroller
Advanced RISC Architecture
Nonvolatile Program and Data Memories
JTAG (IEEE std. 1149.1 Compliant) Interface

Special Microcontroller Features

Power-on Reset and Programmable Brown-out Detection
Internal Calibrated RC Oscillator
External and Internal Interrupt Sources
Six Sleep Modes: Idle, ADC Noise Reduction, Power-save, Power-down, Standby
and Extended Standby

IO

32 Programmable I/O Lines
40-pin PDIP, 44-lead TQFP, and 44-pad MLF

NOTE: All information contained within this article is pure opinion. Although this article is intended to help people, it may contain faulty or misleading information. This article is not to be considered professional opinion or advice, and is in no way a replacement for reading all safety/instructional documentation. Always remember to protect yourself when handling/using hazardous materials, as well as test new techniques before using them on projects/work intended to be handed in or used.

bildr and its contributers take NO responsibility for the information contained within.