Controlling a solenoid
Revision as of 09:52, 21 October 2010 by Robotix (Talk | contribs)

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

From bildr

Jump to: navigation, search

Solenoids are often 12 or 24v, and require a large amount of current to power them. Because of this, simply hooking one up to a microcontroller or other circuit isn't often possible.

Modules in this container


This page is a Container on bildr. Containers are groupings of Modules which all accomplish the same thing but do so in different ways.

NOTE: All information contained within this article is pure opinion. Although this article is intended to help people, it may contain faulty or misleading information. This article is not to be considered professional opinion or advice, and is in no way a replacement for reading all safety/instructional documentation. Always remember to protect yourself when handling/using hazardous materials, as well as test new techniques before using them on projects/work intended to be handed in or used.

bildr and its contributers take NO responsibility for the information contained within.